I've got the 1090 amp in. I'm still working on finding the best gain setting; at the moment I'm seeing ~20% higher position and aircraft counts...
I'm looking at Minicircuits splitters now, but there's dozens of models; anything in particular I should be looking for to narrow it down? When I...
This is the splitter I'm using: https://www.amazon.com/gp/product/B0744CQGS5/ Nothing special; if I can improve on that, I'm open to it. The...
I have a working 1090+978 system that is feeding to ADSBx (and FA). Here's my hardware setup today: Dual-band antenna (outside at top of...
I'm about 15sm from the nearest tower, so I wasn't that hopeful for TIS-B. I know there are numerous UAT planes at GA airports 8sm, 11sm, 17sm...
PiAware 3.6.3 image on RPi3+ with working dump1090 on FA blue stick, feeding both FA and ADSBx. I recently tried adding a splitter cable from my...
Squawk code should be unique within an ARTCC (US), and I'd assume ACC elsewhere, which is a pretty large area. Couldn't the MLAT software be...
We wouldn't know who/what the target is, but we'd still see that something was there, which seems like potentially useful data. Anyone who...
I've got the FA 26" antenna, and it works very well. I consistently pick up planes at FL300 out to 120nm, FL350 out to 160nm and FL400 out to...
Why can't we use MLAT for mode A/C aircraft? That would cover nearly everyone who isn't required to upgrade to ADS-B (i.e. not flying in airspace...
Separate names with a comma.
