Thanks for the clue on the timing. When I ssh into my headless Pi, I can see new data in aircraft.json a lot more frequently than once a minute...
Nice! And thank you. I'd like to do something like that too but with my dump1090-mutability and MySQL. From my fuzzy understanding of your...
My mistake: the 'reg' field is the missing one. In general aviation, the registration (N-number in the US) is commonly used as the callsign....
Not a database lookup: agreed. I maintain call is derived from the ICAO number. I need to find the dump1090 code I once saw that converted ICAO...
Thank you, wiedehopf. Don't you ever eat or sleep? :) I did check my local json (first thing) and it's definitely not there (blank 'call'). No...
TL;DR Call not present in Rest API data for some aircraft. Help! I'm using the Rest API to obtain data on some local aircraft and plot them on...
TL;DR: yes, Y-cable. Yes, a Pi can take two SDRs assuming they will physically fit in the USB sockets and both can be fed with one antenna. Some...
Arrgh! Fixed it. Needed to run the command as root. $ sudo rtl_test -d 1 Found 2 device(s): 0: Stratux, LowPowerV2, SN: stratux:1090 1:...
Thank you again, Marcin. But apparently that was already done for the ADSBX image because I have a file named no-rtl.conf in /etc/modprobe.d/...
Thank you but I already had tried "-d 1" (that's what I meant by "with and without all sorts of device codes"). Here's what using "-d 1"...
Raspberry Pi 3 with two receivers (repurposed from a Stratux project), ADSBX image, successfully feeding 1090ES data from 209.237.86.241. Running...
Bill, you can't judge the relative numbers of 978 MHz UAT aircraft vs. 1090 MHz Mode EZ aircraft totally based on your reception because the...
So why don't you tell the rest of us what the solution was?
I'm having the same or similar trouble Starting at 2019-09-26 12:21:15 (Pacific) my parser reported Error 403 (Forbidden) on API calls. * That...
I've seen this too -- and not just altitude but also latitude and longitude. Probably also groundspeed but I cannot prove it. I've been plagued...
An ADS-B transponder contains a Mode-S transponder. With an extra 56 bits of data (Extended Squitter) a Mode-S transponder can be used for ADS-B....
Mystery solved. Thanks. This means I need to get going with the REST API for my feed. The only thing that has been holding me back was not...
Mine quit too (at about 00:43:00 2019-04-24). All I receive in response now is "403 Forbidden".
About every ten seconds. Regarding the REST API, I'm concerned it would involve a major code re-write. There's a lot I don't understand about...
Frequent NTP under Windows as you suggest in your next posting. But it mostly shouldn't matter because the timestamp of a position reports is...
Separate names with a comma.
