If you write said note on a crisp $20, maybe.
Damn, where do I sign up for my paycheck? :)
So he feeds all the for-profit sites for free... but wants the non-profit site to pay. Sorry, my brain divided by zero...
I'm about 40 miles east of KDFW. I don't see planes on the ground, but they show up once they get any sort of altitude. I also get good results...
The latest ADSBx image supports 978... that's what I'm running. The only criticism I have is that it feeds the traffic directly to ADSBx, versus...
Lol. Just wait until you start talking plenum cable... or waveguide.
LMR400 is expensive? Obviously, you haven't purchased coax or feedline recently. LMR400 is a great price for what it is (the knockoffs like...
Whole different magnitude of data. My feeder exceeds half a megabit just feeding ADSBx from time to time. If you have a decent site with any sort...
I peak out around 140KB/sec. That's a high-coverage feeder (top 1000 on FlightAware) providing, on average, about 850K positions per day. I'm...
Y Yes and no. Heat sinks are great - but they aren't a cooling solution. They are a heat conduction solution - which will eventually reach...
I have an array of SDRs running various things (9 NESDR SMArTs and 3 Airspys). 2 of which are dedicated to 1090 and 978. They get hot enough you...
There were some British spotters arrested several years back... they had an ADS-B receiver, which was a point of contention. I suspect there are...
India also has questionable legal restrictions on the use of ADSB receivers... go Google it.
If your interest is primarily in ADSBx, I'm not entirely sure why you wouldn't use the ADSBx image. Install it, follow the instructions to install...
You're better off running the ADSBx image and adding the other feeders. It's very simple to do. I'm running ADSBx whatever-current-version with...
And that miscoded ModeS/HEX damn sure isn't an F-16 at 58kts... stall speed in best configuration is north of 100kts.
Do you even github, bro? [email protected]:~ $ cd ~ [email protected]:~ $ git clone https://github.com/rtlsdrblog/rtl_biast Cloning into...
You're disconnecting it and reconnecting it... of course it's not going to stay active. I'd follow these instructions and use a very similar...
I've been doing a little tweaking to minimize SD card writes, figured I'd share it here if it's useful: Disable swapping entirely, just in case...
I had no issues adding all the other feeders... they all detected an existing dump1090 running, used the standard port, and didn't try to install...
Separate names with a comma.
