Search Results

Search Again
  1. Ron Guest
    Thread

    tar1090 Question

    One feature I use a lot on both my own VRS setup as well as the now deprecated VRS feed here was to place all military aircraft at the top of the...
    Thread by: Ron Guest, Feb 25, 2020, 17 replies, in forum: Other technical not related to ADSBx Feeding
  2. Ron Guest
    Post

    Getting notification if a specific Aircraft is in the air?

    Not sure if this is helpful but I have a python code snippet that will return 'Found' if an airplane is currently in view of my dump1090 (via...
    Post by: Ron Guest, Jan 16, 2020 in forum: Other technical not related to ADSBx Feeding
  3. Ron Guest
    Post

    PPM offset

    Ah, our replies crossed. I made the change and rebooted. It took about 20 minutes but my new site name is on the list and unique and my PPM...
    Post by: Ron Guest, Jan 16, 2020 in forum: Feeding
  4. Ron Guest
    Post

    PPM offset

    Funny! I wonder if I can simply change the "USER" entry in /etc/default/adsbexchange and restart? I figured ADSBexchange would assign me something...
    Post by: Ron Guest, Jan 16, 2020 in forum: Feeding
  5. Ron Guest
    Post

    PPM offset

    Here is the output of the USER plus the initial portion of the data. There are thunderstorms right now so total aircraft is down a bit from the...
    Post by: Ron Guest, Jan 16, 2020 in forum: Feeding
  6. Ron Guest
    Post

    PPM offset

    Well, I got the new FA Pro Stick Plus and installed it. After 30 minutes my site stats still show a PPM offset of around -58. Maybe it will change...
    Post by: Ron Guest, Jan 15, 2020 in forum: Feeding
  7. Ron Guest
    Post

    PPM offset

    Thanks for the tips. I'll see what happens.
    Post by: Ron Guest, Jan 14, 2020 in forum: Feeding
  8. Ron Guest
    Post

    PPM offset

    Sure, here it is without my lat and long. 4397 /usr/bin/dump1090-fa --net-bo-port 30005 --fix --device-index 0 --gain -10 --ppm -58 --max-range...
    Post by: Ron Guest, Jan 14, 2020 in forum: Feeding
  9. Ron Guest
    Post

    PPM offset

    ok, I ran through what you suggested and the parameters on dump1090-fa changed as expected (from -58 to 0). No I switched it back to -58 and I...
    Post by: Ron Guest, Jan 14, 2020 in forum: Feeding
  10. Ron Guest
    Post

    PPM offset

    Apparently the command I ran modified the file you cited as it has “RECEIVER_OPTIONS="--net-bo-port 30005 --fix --device-index 0 --gain -10 --ppm...
    Post by: Ron Guest, Jan 14, 2020 in forum: Feeding
  11. Ron Guest
    Post

    PPM offset

    I gave it a ' sudo piaware-config rtlsdr-ppm -58' and rebooted and will watch the sync page to see what happens.
    Post by: Ron Guest, Jan 14, 2020 in forum: Feeding
  12. Ron Guest
    Post

    PPM offset

    Sure, here is my sync page. Thanks for your advice. My ProStick Plus was ordered on Jan 23, 2017 so it is about 3 years old. Not sure if that is...
    Post by: Ron Guest, Jan 14, 2020 in forum: Feeding
  13. Ron Guest
    Post

    PPM offset

    On the FA discussion forum I found a suggestion to run "sudo rtl_test -p". The output of letting this run for awhile is below. If these are...
    Post by: Ron Guest, Jan 14, 2020 in forum: Feeding
  14. Ron Guest
    Post

    PPM offset

    I am using the blue FA prostick with the FA antenna, hence I am a bit surprised my PPM offset seems to be a big outlier compared to receivers...
    Post by: Ron Guest, Jan 14, 2020 in forum: Feeding
  15. Ron Guest
    Post

    PPM offset

    Thanks. I knew I could provide a PPM correction but from what I read it didn't seem required. I just wanted to double check since it was reported...
    Post by: Ron Guest, Jan 14, 2020 in forum: Feeding
  16. Ron Guest
    Thread

    PPM offset

    When I look at my feed it’s health is consistently around 89 being dragged down by PPM offset. My values are typically around -60. From what I can...
    Thread by: Ron Guest, Jan 14, 2020, 24 replies, in forum: Feeding
Showing results 1 to 16 of 16
Search Again