its a drone
Hello everybody today I have made my test between GNS antennas and the FA antenna. the conclusion is that every antenna is working fine and I do...
Wiedehopf, I have integrated your code one year ago and stopped working with that because of decoding failures in the software. Especially...
Wiedehopf.... thanks for sharing your comparison which is not done in parallel and you know that frame rates are changing fast. The other point...
....how you are testing for a valid test you need one fix data stream with a fix datarate and then you need to measure. What do you mean is not...
@wiedehopf, did you saw how the receiver was installed in Italy ? I have seen this and I will not gave any comment to this installation which...
Wiedehopf... where is your problem ...? You know exactly that you can not decode all possible frames with a SDR-Raspi combo. This is fact because...
@wiedehopf sorry to say you are wrong... The HULC is outperforming every SDR on the market. I will invite you to visit us and we can test it in a...
Hi ...ok just for your information.... What you have is a broadband antenna means you are receiving different band alltogether. Thats not a good...
@wiedehopf... schick mir mal eine Email an [email protected] mit deiner Telefonnummer und lass uns mal telefonieren... Ich denke mit dem MLAT...
James, thanks for showing your results. to make clear the device is not made for any company. It is independently developed by GNS. It is a...
We checked the performance of socat on the RASPI. You will loose roughly 30% of data because of missing bits and bytes. We strongly recommend not...
In total you are right...but I just have a Hat here ...so... including the solar panel mount ... Set solar + battery + power regulator approx. 80...
Another pic about the feeder for those who are interested....the feeder is draining only 1W so I used a 10W solar panel for powering. Cost are...
James, Dan, you will get tomorrow assist to feed into adsbexchange We will test our setup tomorrow for adsbexchange and will guide you. For my...
@all if you are interested on numbers checkout T-EDDK362 its the ADS-B HAT with a RASPI B T-EDDK371 its a ADS-B HAT battery driven RASPI Zero...
@MDA , @wiedehopf thank you very much for your information. My intention is to inform about new receiver technologies and new ideas regarding...
@wiedehopf ahhhh come on ....this is really childish ... the reason why we use AVR is historical that's all. I do not know very much about the...
@wiedehopf socat on a raspy can't handle 3.000.000 baud .....you will loose data ....this is fact... and this ist tested in our laboratory. Also...
@wiedehopf why dump1090 ? dump1090 is suitable for SDR based devices. The GNS5894 is not based on SDR tuner, so dump1090 is not necessary. By the...
Separate names with a comma.
