Those pictures show clearly "no data available" I'm not sure how you would get the idea they are at Brussels.
The public history doesn't go back that far. If you want to do stuff on politicians travel i'd suggest using an example from 2020/2021.
You can just update / reinstall graphs1090 (same thing) and it'll probably work. https://github.com/wiedehopf/graphs1090#graphs1090 But it shows...
Yeah that sounds like data corruption if anything. You could check F12 dev console in the browser .... what kind of page you get of if there are...
Can't see the graphs .... be more specific which graphs and just the data is gone or the page? If you don't shut down last 24h of graph data isn't...
Actually using NAT and port forwarding to reach the pi going backwards via the NAT seems like the much simpler / more reliable solution:...
Some router with openWRT would be my first try. https://openwrt.org/docs/guide-user/network/wifi/relay_configuration Maybe a pair of commodity...
Yeah the pi zero 2 w would certainly be a good choice due to reduced power usage. > The idle power draw of the Zero 2 is similar to the Zero W...
You have to visit the /myip page from every device you want the ads gone. And it has to show that the feed is working....
Are you using the same browser? Might be some browser plugin or something? Just tested it and it works fine.
You can enable multiselect and then search for planes by hex or registration ... they should all show up in the list. Then open the history. Note...
The local map by definition only shows what you're receiving. I'd recommend opening https://globe.adsbexchange.com/ and looking at the same area...
The data is there so we're clearly not hiding it. It's the LADD list, that's why it's marked as such.
Surface winds don't equal winds aloft. I'd expect the wind at 3000 ft be double or triple the surface wind, it's not uncommon with storms. For...
Displayed speeds are ground speeds. Does that answer your question? Also you can link much better so it instantly shows what you want to show:...
Both pages don't use any resources from the local receiver directly. Rather the data is uploaded to servers and accessed from there. I'm not sure...
You need a decoder, the adsbexchange install scripts don't bring one to not disturb existing installs of a decoder. As you don't have a decoder...
So for ModeS you require 4 receivers for multilateration as no location is sent, then it will be shown as MLAT. Quite likely that we might not...
Hmm ADS-B .... Maybe a 2nd transponder using ModeC or ModeS only ... and you see it via TIS-B. Anyhow ... the text somewhat still applies. They...
Have you read the text for the unknown aircraft .... ? And the links as well?
Separate names with a comma.
