I bow to your wisdom! :-) Thanks, seems if you run the wget twice and the install ZERO, that does not work very well! All running and again, thanks.
Liked what I saw in the Wiki about the automatic gain optimization, so I thought I would give it a try, but this is what I did and what I get:...
But ... just adjust the gain accordingly .... That is the part I am not clear on. Can you point me to a thread or anything on that?
Not sure what you mean by "...just need to adjust SDR appropriately." I am using the FA Blue SDR for 1090. Also to wiedehoph's question, do you...
After having inserted the splitter and having the two SDRs in for a day or so, I noticed that my signal level on 1090 decreased dramatically. I...
Bingo! Thanks again for all the help and "no judgment" for us newbies!
Finally got around to trying this. Followed each and every step you mentioned above, but when going to the 978 page I still get: [ATTACH] And I...
Image was downloaded 01/14/2021 (adsbx-1.0.6)
So with the existing one 1090 SDR in run (stop the services): sudo systemctl stop readsb sudo systemctl stop dump978-fa then run: sudo...
In my case I just started with ADSBx and only the one 1090 SDR. I have the 1090 / 978 antenna. So I am guessing I need a splitter...
ok, got a "test version" (tiny antenna sitting in a window) going with little to no issue using the adsbx-buster image. Thanks! Now quick question...
Thanks so much for NOT telling me I should know this and figure it out myself! Way too many forums like that! So best option might be to use a new...
Yes, I will admit to being an old dog and don't learn new tricks as quickly as I used to. My biggest hurdle will be getting the whole Pi 4...
Separate names with a comma.
