Hello I need your support: I got this version adsbx-custom 4.19.66-v7+ ,when i access locally I can see planes capture , check the logs and appear there but when I try to access https://www.adsbexchange.com/api/feeders/?feed=47f7a8fd-08e8-4635-a6d9-fb252ed7edb8 I dont see any plane. I access to https://adsbx.org/sync/feeder.html?5C&goldrak_ce258a_1.26vlan and see i'm connected but that information are not pass to here https://map.adsbexchange.com/mlat-map/# even i put PUBLIC in the conf. Another thing I note is I dont have this services sudo systemctl restart adsbexchange-feed sudo systemctl restart adsbexchange-mlat but if I try to run curl -L -o /tmp/axfeed.sh https://github.com/adsbxchange/adsb-exchange/raw/master/install.sh give me a messageI dont need. Can you please help me. Best regards Pedro https://www.adsbexchange.com/api/feeders/?feed=47f7a8fd-08e8-4635-a6d9-fb252ed7edb8
You're running a very old image it seems, could you start fresh with a new image please? https://www.adsbexchange.com/how-to-feed/adsbx-custom-pi-image/ The setup has become much easier.
No you'll need to write the new image to the sd-card. You could use a new sd-card, yours has been runnign for some time. That way, you could go back to the old sd-card in case you face some unexpected issue. But again, the guide should outline it and we're here to assist.
