I initially tried to use the ads-b exchange image and ran into problems as it has older versions of software and is long over due on updates. So I installed the flightradar24 image instead and was easily able to start feeding them, but would still like to support ads-b exchange with my data. Has anyone done this before and could provide some guidance on what else to install? I'm not even sure the receiver data can be simultaneously sent to 2 servers.
New image based on piAware 3.5.3 hot off the press here: https://www.adsbexchange.com/downloads/ADSBx-piaware-img-2.0.zip Configure all settings via a text editor on piaware-config.txt... Can also specify your "custom feed" ports. If a second dongle is present, it will feed 978 also.
Please put info about new image on main screen. Add some description (how to... , what is new etc.) Tomorrow I'll try this image on one of my stations.
I started to test image today. First impression - it needs few reboots... OK Bug: Code: adsbx-nickname MDA-test-img2.0 First letter is anyhow changed from capital. Code: mDA-test-img2.0-last 6 digits of MAC WiFi connection doesn't work, probably wpa_supplicant.conf has to be modified manually. Almost perfect .
