how can I insert my custom setup map into my homepage?

Discussion in 'Other technical not related to ADSBx Feeding' started by Tom P., Dec 15, 2018.

  1. Tom P.

    Tom P. Member

    how can I insert my ,, customglobalvrs setup map into my homepage?

    is that possible ?


    EDBV_Radar_GER

    Thanks for your help
     
    Tom P., Dec 15, 2018
    #1
  2. MDA

    MDA Administrator Staff Member

    I think it will be impossible while you have to select receiver from VRS menu. Try to insert your local dump map, MLAT results with standard config will be displayed too.
     
    MDA, Dec 15, 2018
    #2
    Tom P. likes this.
  3. Tom P.

    Tom P. Member

    thx
     
    Tom P., Dec 15, 2018
    #3
  4. MDA

    MDA Administrator Staff Member

    Post link to your website, would be nice to see your results ;).
     
    MDA, Dec 15, 2018
    #4
  5. Tom P.

    Tom P. Member

    Tom P., Dec 15, 2018
    #5
  6. MDA

    MDA Administrator Staff Member

    I see you are using non-standard feeder. Did you succesfully setup ADSBx MLAT-client?
    Any new feed from MV is very welcome due to military aircrafts traffic.
     
    MDA, Dec 16, 2018
    #6
  7. Tom P.

    Tom P. Member

    yes i have sucessfully mlat client . i have the vrs feed software , and share with adsbexchange
    the rescuehelicopter or the mil jets is showing on the adsb list , when i receive mode-s signal
     
    Tom P., Dec 16, 2018
    #7
  8. MDA

    MDA Administrator Staff Member

    What is your username in MLAT-client, I can't see any new feeder in MV.
    And please describe more detailed your setup. If something fails we'll try to help.
     
    MDA, Dec 16, 2018
    #8
  9. Tom P.

    Tom P. Member

    oh i am soo sorry I confused something, I have set in the VRS software MLAT, but you mean something else? :(
     
    Tom P., Dec 16, 2018
    #9
  10. MDA

    MDA Administrator Staff Member

    Please write which stick, which decoder are you using.
    According to website you published this is stick with built-in decoder. So probably you don't use any version of dump-1090.
    With VRS you can inject your instance to your website, with some small adjustments MLAT results from ADSBx can be displayed too.
     
    MDA, Dec 16, 2018
    #10
  11. Tom P.

    Tom P. Member

    That is interesting !

    I have a USB GNS 5860 stick for adsb .
     
    Tom P., Dec 16, 2018
    #11
  12. MDA

    MDA Administrator Staff Member

    Now step-by-step :D. Stick is known, decoding, visualising software not yet...
    What username are you using for ADSBx and is --privacy option active?
     
    MDA, Dec 16, 2018
    #12
  13. Tom P.

    Tom P. Member

    Tom P., Dec 16, 2018
    #13
  14. MDA

    MDA Administrator Staff Member

    If you need assistance just send me PM. I'll try to guide you thru all necessary steps to add your coverage results to your website.
    User name is part of ADSBx mlat-client setup, if you're feeding from RPi with scripted setup location is: adsb-exchange/adsbexchange-mlat_maint.sh
     
    MDA, Dec 16, 2018
    #14
  15. Tom P.

    Tom P. Member

    thanks , with the Virtual Radar Server client does this MLat not work or only with the Raspi?
     
    Tom P., Dec 16, 2018
    #15
  16. MDA

    MDA Administrator Staff Member

    You are not answering my questions, MLAT results can be used even from windows MLAT client. If you don't wan't to show all of your data on forum just send me PM. I'll help you with config.
     
    MDA, Dec 16, 2018
    #16
  17. MDA

    MDA Administrator Staff Member

    MLAT client installed, with some data. I'm not fully happy with it. Stick is GNS 5890 not 5860. Maybe with ModeSDeco will be possible to redirect data with right format to mlat-client.
     
    MDA, Dec 17, 2018
    #17