Not showing on sync

Hi, am running a Pi 3b+ latest stretch, in southern uk, username wombatman.
dump1090-mutability,mlat-client, installed and configured as per instructions.

Feeding FR24 happily, dump1090 showing tracked planes on local network, but nothing showing in the sync matrix for adsb-exchange, although I did appear briefly, not configured for custom port. Any ideas?

 

No problem, kind of figured that might be the issue. Keep up the good work

 

You want a custom port?

 

Would be more than happy to take one, which one would you suggest?

 

https://customglobal4.adsbexchange.com/VirtualRadar/desktop.html/

Any of the zCons-51xxx on custom4 will work. How about 51xxx ?

Want it named wombatman?

EDIT: removed the port so nobody gets any ideas

 

Thanks James, that would be great, is it just a case of redirecting the port from 30005 to 51xxx when running the setup.sh script or is there a config file which needs editing too please?

 

Depends on how you installed and what image.

If you used the github commands - then just change TCP:feed.adsbechange.com:30005 to TCP:feed.adsbechange.com:51398 in /home/pi/adsb-exchange - file adsbexchnage_netcat_maint.sh ... something like that

If you are using the custom image. Change the port in /boot/adsb-config.txt or /boot/piaware-config.txt

 

Looks good!

 

Well it was working ... not now :d

 

All done, but has just been pointed out to me by one of the guys at 360radar, I may need to adjust the longtitude co-ord by prefixing it with a '-' as am left of the greenwich meridian, so will rerun setup to correct this too.

 

Ok, sounds good.

 

Thank you James.