Useful Addons: graphs1090, tar1090 et cetera

Discussion in 'Tutorials' started by wiedehopf, Sep 15, 2019.

  1. wiedehopf

    wiedehopf Administrator Staff Member

    Hello, i've been maintaining some addons for dump1090-fa.
    (graphs also work for dump1090-mutability)
    They are meant for Raspbian Stretch and later, but they should work on Debian and Ubuntu as well.

    Installing dump1090-fa first via the bundle (or another way) is required for all addons except the graphs.
    The graphs will work with other dump1090 versions, but dump1090-fa is still recommended!

    Bundle dump1090-fa: Install dump1090-fa while keeping the old interface around
    (incompatible with ADSBX image!)

    https://github.com/wiedehopf/adsb-scripts/wiki/Bundle-install-for-dump1090fa


    graphs1090
    (incompatible with ADSBX image!)

    Graphs based on dump1090-tools by mutability and the adsb receiver project graphs.
    https://github.com/wiedehopf/graphs1090#graphs1090


    tar1090: Improved webinterface for dump1090-fa
    (works ok with the adsbx image)

    https://github.com/wiedehopf/tar1090#tar1090


    timelapse1090: history/playback interface for the local map (requires dump1090-fa)
    (incompatible with ADSBX image!)

    https://github.com/wiedehopf/timelapse1090#timelapse1090


    airspy-conf: configure the airspy_adsb (Airspy Mini/R2) to work with dump1090-fa
    (incompatible with ADSBX image!)

    https://github.com/wiedehopf/airspy-conf#airspy-conf
     
    Last edited: Jan 19, 2020
    wiedehopf, Sep 15, 2019
    #1
    James, Peter Psota, Nummer378 and 3 others like this.
  2. David Robbins

    David Robbins New Member

    why won't the timelapse1090 work for dump1090-mutability??
     
    David Robbins, Nov 21, 2019
    #2
  3. wiedehopf

    wiedehopf Administrator Staff Member

    because of the json format.

    Just go with the bundle if you want to retain the mutability webinterface.
     
    wiedehopf, Nov 21, 2019
    #3
    James likes this.
  4. fritz614

    fritz614 New Member

    I have installed V1.28vlan first, then I installed the tar1090 and it was all working fine. I then tried installing the bundle dump at top of this page and nothing seems to be working now. I see there was an ajax error for the Grafan map and the tar1090 map page would not even open. Is there something I am doing in the wrong order?

    My main goal was to get feeders to FA24 and FR24

    I am using a pi3B+ with a 64GB SDcard and the 1090/978 antenna.
     
    fritz614, Jan 18, 2020
    #4
  5. wiedehopf

    wiedehopf Administrator Staff Member

    The bundle install was never meant for the adsbx image.
    I'll clarify the first post.

    I'm not sure what is broken with your install.
    Try reinstalling tar1090, at least that should ten work.

    Basically ... start with a fresh image.
    And if you want to use my scripts, it's best to use a standard Raspbian.
     
    wiedehopf, Jan 19, 2020
    #5
  6. fritz614

    fritz614 New Member

    Thanks for your reply, I did re-image and all is good.

    Could you or someone point me to a thread that would allow me to feed FR24 & FA24? I think I found some, but appear "old", so i am not sure what is current.

    Thanks again
     
    fritz614, Jan 19, 2020
    #6